Post by 88ttopgt on May 20, 2010 20:57:18 GMT -5
I am putting an '86 turbocoupe motor into a 1990 Mustang. I am using the big vam/LA3. I have a harness in my storage garage from an '86 turbocoupe and was wondering if the wire connector to the big vam is the same as the small vam that I could find on the '86 turbocoupe harness that I have. Could I just cut the small Vam wire connector from the '86 TC harness and use it for the big vam/LA3 swap?
